Screen Printing Squeegee Applications and Replacement Blades

Use a screen printing squeegee for t-shirt printing around 70–75A with a square edge for most plastisol. Use a harder PCB screen printing squeegee or glass screen printing squeegee when the film must stay thin and even. After setup, reorder a screen printing squeegee replacement blade or a PU squeegee blade roll instead of a new handle every time.

Application decides hardness. A textile screen printing squeegee and a garment screen printing squeegee live in the same family as a screen printing squeegee for t-shirt printing. A screen printing squeegee for plastisol is often medium and square. A screen printing squeegee for water based ink should not be a blade still wet with plastisol; many shops dedicate one blade to water-based ink. A PCB screen printing squeegee is typically harder. A glass screen printing squeegee and a ceramic screen printing squeegee print on rigid surfaces and usually need a stable edge. A graphic screen printing squeegee on flat paper or board is often firmer than a fashion-textile blade.

Press type matters. A manual screen printing squeegee is pulled by the printer, so length and handle comfort matter. An automatic screen printing squeegee and a screen printing machine squeegee must match the machine clamp and the stroke. Do not change durometer on one station only if the artwork is a multi-color garment job.

Replacement is where the repeat order sits. A screen printing squeegee replacement blade, a replacement screen printing squeegee, a screen printing squeegee blade refill, and a spare screen printing squeegee are the same purchasing intent: the approved spec, again. A screen printing squeegee rubber roll or a PU squeegee blade roll lets the shop cut length in house. Polyurethane squeegee blade wholesale and a screen printing squeegee blade cut to size are the two wholesale formats. Cut-to-size is easier for a shop with fixed frame widths. Roll stock is easier for a distributor.

Macrokun can quote handled squeegees and blade-only refills. Send the old blade's durometer, edge, thickness, height, and length.

Specification notes for each search

screen printing squeegee for t-shirt printing

Purchasers comparing screen printing squeegee for t-shirt printing should confirm Shore A, edge profile, thickness, and free length before they pay. T-shirt work is often 70A or 75A with a square edge on plastisol.

A factory quote for screen printing squeegee for t-shirt printing should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. T-shirt work is often 70A or 75A with a square edge on plastisol.

Shops that reorder screen printing squeegee for t-shirt printing keep the approved hardness on the rack and do not mix it with a softer or harder blade. T-shirt work is often 70A or 75A with a square edge on plastisol.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee for t-shirt printing on the replacement inquiry with the old measurements. T-shirt work is often 70A or 75A with a square edge on plastisol.

To request screen printing squeegee for t-shirt printing, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. T-shirt work is often 70A or 75A with a square edge on plastisol.

textile screen printing squeegee

Purchasers comparing textile screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Textile blades must match mesh count: finer mesh usually wants a firmer blade and less pressure.

A factory quote for textile screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Textile blades must match mesh count: finer mesh usually wants a firmer blade and less pressure.

Shops that reorder textile screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Textile blades must match mesh count: finer mesh usually wants a firmer blade and less pressure.

If the current blade floods, streaks, or wears out in a few shifts, put textile screen printing squeegee on the replacement inquiry with the old measurements. Textile blades must match mesh count: finer mesh usually wants a firmer blade and less pressure.

To request textile screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Textile blades must match mesh count: finer mesh usually wants a firmer blade and less pressure.

garment screen printing squeegee

Purchasers comparing garment screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Garment printers often keep separate blades for underbase and for highlight colors.

A factory quote for garment screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Garment printers often keep separate blades for underbase and for highlight colors.

Shops that reorder garment screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Garment printers often keep separate blades for underbase and for highlight colors.

If the current blade floods, streaks, or wears out in a few shifts, put garment screen printing squeegee on the replacement inquiry with the old measurements. Garment printers often keep separate blades for underbase and for highlight colors.

To request garment screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Garment printers often keep separate blades for underbase and for highlight colors.

screen printing squeegee for plastisol

Purchasers comparing screen printing squeegee for plastisol should confirm Shore A, edge profile, thickness, and free length before they pay. Plastisol is commonly printed with a medium square-edge PU blade.

A factory quote for screen printing squeegee for plastisol should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Plastisol is commonly printed with a medium square-edge PU blade.

Shops that reorder screen printing squeegee for plastisol keep the approved hardness on the rack and do not mix it with a softer or harder blade. Plastisol is commonly printed with a medium square-edge PU blade.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee for plastisol on the replacement inquiry with the old measurements. Plastisol is commonly printed with a medium square-edge PU blade.

To request screen printing squeegee for plastisol, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Plastisol is commonly printed with a medium square-edge PU blade.

screen printing squeegee for water based ink

Purchasers comparing screen printing squeegee for water based ink should confirm Shore A, edge profile, thickness, and free length before they pay. Water-based ink often needs a softer blade or a dedicated blade that is not contaminated with plastisol.

A factory quote for screen printing squeegee for water based ink should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Water-based ink often needs a softer blade or a dedicated blade that is not contaminated with plastisol.

Shops that reorder screen printing squeegee for water based ink keep the approved hardness on the rack and do not mix it with a softer or harder blade. Water-based ink often needs a softer blade or a dedicated blade that is not contaminated with plastisol.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee for water based ink on the replacement inquiry with the old measurements. Water-based ink often needs a softer blade or a dedicated blade that is not contaminated with plastisol.

To request screen printing squeegee for water based ink, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Water-based ink often needs a softer blade or a dedicated blade that is not contaminated with plastisol.

PCB screen printing squeegee

Purchasers comparing PCB screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. PCB and printed electronics usually need a harder, stable blade and a clean edge.

A factory quote for PCB screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. PCB and printed electronics usually need a harder, stable blade and a clean edge.

Shops that reorder PCB screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. PCB and printed electronics usually need a harder, stable blade and a clean edge.

If the current blade floods, streaks, or wears out in a few shifts, put PCB screen printing squeegee on the replacement inquiry with the old measurements. PCB and printed electronics usually need a harder, stable blade and a clean edge.

To request PCB screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. PCB and printed electronics usually need a harder, stable blade and a clean edge.

glass screen printing squeegee

Purchasers comparing glass screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Glass printing often uses a harder PU blade so the ink film stays even on a rigid surface.

A factory quote for glass screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Glass printing often uses a harder PU blade so the ink film stays even on a rigid surface.

Shops that reorder glass screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Glass printing often uses a harder PU blade so the ink film stays even on a rigid surface.

If the current blade floods, streaks, or wears out in a few shifts, put glass screen printing squeegee on the replacement inquiry with the old measurements. Glass printing often uses a harder PU blade so the ink film stays even on a rigid surface.

To request glass screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Glass printing often uses a harder PU blade so the ink film stays even on a rigid surface.

ceramic screen printing squeegee

Purchasers comparing ceramic screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Ceramic decoration needs a blade that tolerates the ink or paste used on that line.

A factory quote for ceramic screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Ceramic decoration needs a blade that tolerates the ink or paste used on that line.

Shops that reorder ceramic screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Ceramic decoration needs a blade that tolerates the ink or paste used on that line.

If the current blade floods, streaks, or wears out in a few shifts, put ceramic screen printing squeegee on the replacement inquiry with the old measurements. Ceramic decoration needs a blade that tolerates the ink or paste used on that line.

To request ceramic screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Ceramic decoration needs a blade that tolerates the ink or paste used on that line.

graphic screen printing squeegee

Purchasers comparing graphic screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Graphic work on flat stock often uses a firmer blade than fashion textile work.

A factory quote for graphic screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Graphic work on flat stock often uses a firmer blade than fashion textile work.

Shops that reorder graphic screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Graphic work on flat stock often uses a firmer blade than fashion textile work.

If the current blade floods, streaks, or wears out in a few shifts, put graphic screen printing squeegee on the replacement inquiry with the old measurements. Graphic work on flat stock often uses a firmer blade than fashion textile work.

To request graphic screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Graphic work on flat stock often uses a firmer blade than fashion textile work.

manual screen printing squeegee

Purchasers comparing manual screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Manual blades are pulled by hand, so handle comfort and blade length matter as much as durometer.

A factory quote for manual screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Manual blades are pulled by hand, so handle comfort and blade length matter as much as durometer.

Shops that reorder manual screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Manual blades are pulled by hand, so handle comfort and blade length matter as much as durometer.

If the current blade floods, streaks, or wears out in a few shifts, put manual screen printing squeegee on the replacement inquiry with the old measurements. Manual blades are pulled by hand, so handle comfort and blade length matter as much as durometer.

To request manual screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Manual blades are pulled by hand, so handle comfort and blade length matter as much as durometer.

automatic screen printing squeegee

Purchasers comparing automatic screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Automatic presses need consistent blade length, angle, and durometer across stations.

A factory quote for automatic screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Automatic presses need consistent blade length, angle, and durometer across stations.

Shops that reorder automatic screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Automatic presses need consistent blade length, angle, and durometer across stations.

If the current blade floods, streaks, or wears out in a few shifts, put automatic screen printing squeegee on the replacement inquiry with the old measurements. Automatic presses need consistent blade length, angle, and durometer across stations.

To request automatic screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Automatic presses need consistent blade length, angle, and durometer across stations.

screen printing machine squeegee

Purchasers comparing screen printing machine squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Confirm the machine clamp width before ordering the blade height and thickness.

A factory quote for screen printing machine squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Confirm the machine clamp width before ordering the blade height and thickness.

Shops that reorder screen printing machine squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Confirm the machine clamp width before ordering the blade height and thickness.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing machine squeegee on the replacement inquiry with the old measurements. Confirm the machine clamp width before ordering the blade height and thickness.

To request screen printing machine squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Confirm the machine clamp width before ordering the blade height and thickness.

screen printing squeegee replacement blade

Purchasers comparing screen printing squeegee replacement blade should confirm Shore A, edge profile, thickness, and free length before they pay. Swap only the blade if the handle is still straight and the channel still grips.

A factory quote for screen printing squeegee replacement blade should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Swap only the blade if the handle is still straight and the channel still grips.

Shops that reorder screen printing squeegee replacement blade keep the approved hardness on the rack and do not mix it with a softer or harder blade. Swap only the blade if the handle is still straight and the channel still grips.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee replacement blade on the replacement inquiry with the old measurements. Swap only the blade if the handle is still straight and the channel still grips.

To request screen printing squeegee replacement blade, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Swap only the blade if the handle is still straight and the channel still grips.

replacement screen printing squeegee

Purchasers comparing replacement screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Mark the old durometer on the handle so the replacement is not mixed on the rack.

A factory quote for replacement screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Mark the old durometer on the handle so the replacement is not mixed on the rack.

Shops that reorder replacement screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Mark the old durometer on the handle so the replacement is not mixed on the rack.

If the current blade floods, streaks, or wears out in a few shifts, put replacement screen printing squeegee on the replacement inquiry with the old measurements. Mark the old durometer on the handle so the replacement is not mixed on the rack.

To request replacement screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Mark the old durometer on the handle so the replacement is not mixed on the rack.

screen printing squeegee blade refill

Purchasers comparing screen printing squeegee blade refill should confirm Shore A, edge profile, thickness, and free length before they pay. Refill blades are cut from roll stock to the length you already use.

A factory quote for screen printing squeegee blade refill should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Refill blades are cut from roll stock to the length you already use.

Shops that reorder screen printing squeegee blade refill keep the approved hardness on the rack and do not mix it with a softer or harder blade. Refill blades are cut from roll stock to the length you already use.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee blade refill on the replacement inquiry with the old measurements. Refill blades are cut from roll stock to the length you already use.

To request screen printing squeegee blade refill, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Refill blades are cut from roll stock to the length you already use.

spare screen printing squeegee

Purchasers comparing spare screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Keep at least one spare per durometer that is on the production schedule.

A factory quote for spare screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Keep at least one spare per durometer that is on the production schedule.

Shops that reorder spare screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Keep at least one spare per durometer that is on the production schedule.

If the current blade floods, streaks, or wears out in a few shifts, put spare screen printing squeegee on the replacement inquiry with the old measurements. Keep at least one spare per durometer that is on the production schedule.

To request spare screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Keep at least one spare per durometer that is on the production schedule.

screen printing squeegee rubber roll

Purchasers comparing screen printing squeegee rubber roll should confirm Shore A, edge profile, thickness, and free length before they pay. Roll stock lets the shop cut replacements instead of waiting for fixed lengths.

A factory quote for screen printing squeegee rubber roll should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Roll stock lets the shop cut replacements instead of waiting for fixed lengths.

Shops that reorder screen printing squeegee rubber roll keep the approved hardness on the rack and do not mix it with a softer or harder blade. Roll stock lets the shop cut replacements instead of waiting for fixed lengths.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee rubber roll on the replacement inquiry with the old measurements. Roll stock lets the shop cut replacements instead of waiting for fixed lengths.

To request screen printing squeegee rubber roll, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Roll stock lets the shop cut replacements instead of waiting for fixed lengths.

PU squeegee blade roll

Purchasers comparing PU squeegee blade roll should confirm Shore A, edge profile, thickness, and free length before they pay. A PU squeegee blade roll is sold by meter in a stated width, thickness, and Shore A.

A factory quote for PU squeegee blade roll should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. A PU squeegee blade roll is sold by meter in a stated width, thickness, and Shore A.

Shops that reorder PU squeegee blade roll keep the approved hardness on the rack and do not mix it with a softer or harder blade. A PU squeegee blade roll is sold by meter in a stated width, thickness, and Shore A.

If the current blade floods, streaks, or wears out in a few shifts, put PU squeegee blade roll on the replacement inquiry with the old measurements. A PU squeegee blade roll is sold by meter in a stated width, thickness, and Shore A.

To request PU squeegee blade roll, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. A PU squeegee blade roll is sold by meter in a stated width, thickness, and Shore A.

polyurethane squeegee blade wholesale

Purchasers comparing polyurethane squeegee blade wholesale should confirm Shore A, edge profile, thickness, and free length before they pay. Wholesale roll orders should state meters, durometer, and edge if the edge is pre-shaped.

A factory quote for polyurethane squeegee blade wholesale should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Wholesale roll orders should state meters, durometer, and edge if the edge is pre-shaped.

Shops that reorder polyurethane squeegee blade wholesale keep the approved hardness on the rack and do not mix it with a softer or harder blade. Wholesale roll orders should state meters, durometer, and edge if the edge is pre-shaped.

If the current blade floods, streaks, or wears out in a few shifts, put polyurethane squeegee blade wholesale on the replacement inquiry with the old measurements. Wholesale roll orders should state meters, durometer, and edge if the edge is pre-shaped.

To request polyurethane squeegee blade wholesale, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Wholesale roll orders should state meters, durometer, and edge if the edge is pre-shaped.

screen printing squeegee blade cut to size

Purchasers comparing screen printing squeegee blade cut to size should confirm Shore A, edge profile, thickness, and free length before they pay. Cut-to-size blades reduce waste when every press uses a different frame width.

A factory quote for screen printing squeegee blade cut to size should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Cut-to-size blades reduce waste when every press uses a different frame width.

Shops that reorder screen printing squeegee blade cut to size keep the approved hardness on the rack and do not mix it with a softer or harder blade. Cut-to-size blades reduce waste when every press uses a different frame width.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee blade cut to size on the replacement inquiry with the old measurements. Cut-to-size blades reduce waste when every press uses a different frame width.

To request screen printing squeegee blade cut to size, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Cut-to-size blades reduce waste when every press uses a different frame width.

Quotation

Macrokun (Hebei Macrokun Mesh Co., Ltd.) manufactures screen printing squeegees, polyurethane blades, and related screen printing supplies for export. Website: macrokun.com. Email: sales@macrokun.com. WhatsApp: +86 13803219803.

Pre：Screen Printing Squeegee Durometer, Edge, and Size Specifications

Next：none