Screen Printing Squeegee Durometer, Edge, and Size Specifications

Choose a soft screen printing squeegee near 60A for a heavier ink film, a medium screen printing squeegee near 70–75A for most garments, and a hard screen printing squeegee near 80–85A for finer detail. State the edge as square, beveled, or round, and state thickness, often 9 mm, plus the free length.

Hardness is Shore A. A 60 durometer screen printing squeegee flexes and deposits more ink. A 70 durometer screen printing squeegee is the textile default in many shops. A 75 durometer screen printing squeegee is a firmer daily blade. An 80 durometer screen printing squeegee and an 85 durometer screen printing squeegee keep a sharper edge for detail, many UV inks, and a number of industrial jobs. Write shore A screen printing squeegee on the order so the scale is unambiguous.

A soft screen printing squeegee, a medium screen printing squeegee, and a hard screen printing squeegee are ranges, not brands. A triple durometer screen printing squeegee and a dual durometer screen printing squeegee are layered blades: harder where the edge must resist the ink, softer where the body must bend. Ask for a sketch of the layers before an OEM custom durometer screen printing squeegee run. Screen printing squeegee 70A wholesale is often the first stock a distributor commits to because it covers the widest textile demand.

Edge shape changes the ink film even when Shore A stays the same. A square edge screen printing squeegee is the usual shear edge. A beveled edge screen printing squeegee needs an angle on the drawing. A round edge screen printing squeegee lays more ink and is used for selected effects. Cross-section matters too. A screen printing squeegee blade 50mm describes a common height. A screen printing squeegee 9mm thickness must match the press holder. A custom length screen printing squeegee should be shorter than the inside width of the frame so the ends do not hit the frame.

If two shops print the same artwork with different hardness or different edges, the prints will not match. Approve one combination and reorder that combination.

Specification notes for each search

60 durometer screen printing squeegee

Purchasers comparing 60 durometer screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. 60A is a soft blade for heavy deposit, special effects, and some water-based textile work.

A factory quote for 60 durometer screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. 60A is a soft blade for heavy deposit, special effects, and some water-based textile work.

Shops that reorder 60 durometer screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. 60A is a soft blade for heavy deposit, special effects, and some water-based textile work.

If the current blade floods, streaks, or wears out in a few shifts, put 60 durometer screen printing squeegee on the replacement inquiry with the old measurements. 60A is a soft blade for heavy deposit, special effects, and some water-based textile work.

To request 60 durometer screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. 60A is a soft blade for heavy deposit, special effects, and some water-based textile work.

70 durometer screen printing squeegee

Purchasers comparing 70 durometer screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. 70A is a common all-round textile hardness.

A factory quote for 70 durometer screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. 70A is a common all-round textile hardness.

Shops that reorder 70 durometer screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. 70A is a common all-round textile hardness.

If the current blade floods, streaks, or wears out in a few shifts, put 70 durometer screen printing squeegee on the replacement inquiry with the old measurements. 70A is a common all-round textile hardness.

To request 70 durometer screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. 70A is a common all-round textile hardness.

75 durometer screen printing squeegee

Purchasers comparing 75 durometer screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. 75A is slightly firmer and holds a cleaner edge on many garment jobs.

A factory quote for 75 durometer screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. 75A is slightly firmer and holds a cleaner edge on many garment jobs.

Shops that reorder 75 durometer screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. 75A is slightly firmer and holds a cleaner edge on many garment jobs.

If the current blade floods, streaks, or wears out in a few shifts, put 75 durometer screen printing squeegee on the replacement inquiry with the old measurements. 75A is slightly firmer and holds a cleaner edge on many garment jobs.

To request 75 durometer screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. 75A is slightly firmer and holds a cleaner edge on many garment jobs.

80 durometer screen printing squeegee

Purchasers comparing 80 durometer screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. 80A is used when the print needs less ink and a sharper edge.

A factory quote for 80 durometer screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. 80A is used when the print needs less ink and a sharper edge.

Shops that reorder 80 durometer screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. 80A is used when the print needs less ink and a sharper edge.

If the current blade floods, streaks, or wears out in a few shifts, put 80 durometer screen printing squeegee on the replacement inquiry with the old measurements. 80A is used when the print needs less ink and a sharper edge.

To request 80 durometer screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. 80A is used when the print needs less ink and a sharper edge.

85 durometer screen printing squeegee

Purchasers comparing 85 durometer screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. 85A is a hard blade for fine detail, many UV jobs, and some industrial prints.

A factory quote for 85 durometer screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. 85A is a hard blade for fine detail, many UV jobs, and some industrial prints.

Shops that reorder 85 durometer screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. 85A is a hard blade for fine detail, many UV jobs, and some industrial prints.

If the current blade floods, streaks, or wears out in a few shifts, put 85 durometer screen printing squeegee on the replacement inquiry with the old measurements. 85A is a hard blade for fine detail, many UV jobs, and some industrial prints.

To request 85 durometer screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. 85A is a hard blade for fine detail, many UV jobs, and some industrial prints.

shore A screen printing squeegee

Purchasers comparing shore A screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Always write Shore A on the PO so 70A is not confused with an IRHD or Shore D scale.

A factory quote for shore A screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Always write Shore A on the PO so 70A is not confused with an IRHD or Shore D scale.

Shops that reorder shore A screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Always write Shore A on the PO so 70A is not confused with an IRHD or Shore D scale.

If the current blade floods, streaks, or wears out in a few shifts, put shore A screen printing squeegee on the replacement inquiry with the old measurements. Always write Shore A on the PO so 70A is not confused with an IRHD or Shore D scale.

To request shore A screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Always write Shore A on the PO so 70A is not confused with an IRHD or Shore D scale.

soft screen printing squeegee

Purchasers comparing soft screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Soft means roughly 60–65A and more ink laydown.

A factory quote for soft screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Soft means roughly 60–65A and more ink laydown.

Shops that reorder soft screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Soft means roughly 60–65A and more ink laydown.

If the current blade floods, streaks, or wears out in a few shifts, put soft screen printing squeegee on the replacement inquiry with the old measurements. Soft means roughly 60–65A and more ink laydown.

To request soft screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Soft means roughly 60–65A and more ink laydown.

medium screen printing squeegee

Purchasers comparing medium screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Medium means roughly 70–75A for everyday textile and graphic work.

A factory quote for medium screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Medium means roughly 70–75A for everyday textile and graphic work.

Shops that reorder medium screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Medium means roughly 70–75A for everyday textile and graphic work.

If the current blade floods, streaks, or wears out in a few shifts, put medium screen printing squeegee on the replacement inquiry with the old measurements. Medium means roughly 70–75A for everyday textile and graphic work.

To request medium screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Medium means roughly 70–75A for everyday textile and graphic work.

hard screen printing squeegee

Purchasers comparing hard screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Hard means roughly 80–90A for detail and thinner ink films.

A factory quote for hard screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Hard means roughly 80–90A for detail and thinner ink films.

Shops that reorder hard screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Hard means roughly 80–90A for detail and thinner ink films.

If the current blade floods, streaks, or wears out in a few shifts, put hard screen printing squeegee on the replacement inquiry with the old measurements. Hard means roughly 80–90A for detail and thinner ink films.

To request hard screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Hard means roughly 80–90A for detail and thinner ink films.

triple durometer screen printing squeegee

Purchasers comparing triple durometer screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. A triple blade often uses a softer center between two harder faces so the edge resists ink but the body still flexes.

A factory quote for triple durometer screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. A triple blade often uses a softer center between two harder faces so the edge resists ink but the body still flexes.

Shops that reorder triple durometer screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. A triple blade often uses a softer center between two harder faces so the edge resists ink but the body still flexes.

If the current blade floods, streaks, or wears out in a few shifts, put triple durometer screen printing squeegee on the replacement inquiry with the old measurements. A triple blade often uses a softer center between two harder faces so the edge resists ink but the body still flexes.

To request triple durometer screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. A triple blade often uses a softer center between two harder faces so the edge resists ink but the body still flexes.

dual durometer screen printing squeegee

Purchasers comparing dual durometer screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. A dual blade bonds a harder print face to a softer body.

A factory quote for dual durometer screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. A dual blade bonds a harder print face to a softer body.

Shops that reorder dual durometer screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. A dual blade bonds a harder print face to a softer body.

If the current blade floods, streaks, or wears out in a few shifts, put dual durometer screen printing squeegee on the replacement inquiry with the old measurements. A dual blade bonds a harder print face to a softer body.

To request dual durometer screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. A dual blade bonds a harder print face to a softer body.

square edge screen printing squeegee

Purchasers comparing square edge screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. A square edge shears a controlled ink film and is the default for most textile printing.

A factory quote for square edge screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. A square edge shears a controlled ink film and is the default for most textile printing.

Shops that reorder square edge screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. A square edge shears a controlled ink film and is the default for most textile printing.

If the current blade floods, streaks, or wears out in a few shifts, put square edge screen printing squeegee on the replacement inquiry with the old measurements. A square edge shears a controlled ink film and is the default for most textile printing.

To request square edge screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. A square edge shears a controlled ink film and is the default for most textile printing.

beveled edge screen printing squeegee

Purchasers comparing beveled edge screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. A bevel can help scoop or print on uneven surfaces; specify the bevel angle.

A factory quote for beveled edge screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. A bevel can help scoop or print on uneven surfaces; specify the bevel angle.

Shops that reorder beveled edge screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. A bevel can help scoop or print on uneven surfaces; specify the bevel angle.

If the current blade floods, streaks, or wears out in a few shifts, put beveled edge screen printing squeegee on the replacement inquiry with the old measurements. A bevel can help scoop or print on uneven surfaces; specify the bevel angle.

To request beveled edge screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. A bevel can help scoop or print on uneven surfaces; specify the bevel angle.

round edge screen printing squeegee

Purchasers comparing round edge screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. A round edge lays a heavier ink film and is used for some special effects.

A factory quote for round edge screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. A round edge lays a heavier ink film and is used for some special effects.

Shops that reorder round edge screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. A round edge lays a heavier ink film and is used for some special effects.

If the current blade floods, streaks, or wears out in a few shifts, put round edge screen printing squeegee on the replacement inquiry with the old measurements. A round edge lays a heavier ink film and is used for some special effects.

To request round edge screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. A round edge lays a heavier ink film and is used for some special effects.

screen printing squeegee blade 50mm

Purchasers comparing screen printing squeegee blade 50mm should confirm Shore A, edge profile, thickness, and free length before they pay. 50 mm is a common blade height before it is inserted into the handle.

A factory quote for screen printing squeegee blade 50mm should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. 50 mm is a common blade height before it is inserted into the handle.

Shops that reorder screen printing squeegee blade 50mm keep the approved hardness on the rack and do not mix it with a softer or harder blade. 50 mm is a common blade height before it is inserted into the handle.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee blade 50mm on the replacement inquiry with the old measurements. 50 mm is a common blade height before it is inserted into the handle.

To request screen printing squeegee blade 50mm, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. 50 mm is a common blade height before it is inserted into the handle.

screen printing squeegee 9mm thickness

Purchasers comparing screen printing squeegee 9mm thickness should confirm Shore A, edge profile, thickness, and free length before they pay. 9 mm thickness is a frequent spec alongside 7 mm and 10 mm; match the holder slot.

A factory quote for screen printing squeegee 9mm thickness should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. 9 mm thickness is a frequent spec alongside 7 mm and 10 mm; match the holder slot.

Shops that reorder screen printing squeegee 9mm thickness keep the approved hardness on the rack and do not mix it with a softer or harder blade. 9 mm thickness is a frequent spec alongside 7 mm and 10 mm; match the holder slot.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee 9mm thickness on the replacement inquiry with the old measurements. 9 mm thickness is a frequent spec alongside 7 mm and 10 mm; match the holder slot.

To request screen printing squeegee 9mm thickness, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. 9 mm thickness is a frequent spec alongside 7 mm and 10 mm; match the holder slot.

custom length screen printing squeegee

Purchasers comparing custom length screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Cut length should be about 2–5 cm shorter than the inside screen width, depending on the press.

A factory quote for custom length screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Cut length should be about 2–5 cm shorter than the inside screen width, depending on the press.

Shops that reorder custom length screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Cut length should be about 2–5 cm shorter than the inside screen width, depending on the press.

If the current blade floods, streaks, or wears out in a few shifts, put custom length screen printing squeegee on the replacement inquiry with the old measurements. Cut length should be about 2–5 cm shorter than the inside screen width, depending on the press.

To request custom length screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Cut length should be about 2–5 cm shorter than the inside screen width, depending on the press.

OEM custom durometer screen printing squeegee

Purchasers comparing OEM custom durometer screen printing squeegee should confirm Shore A, edge profile, thickness, and free length before they pay. Custom durometer OEM is possible inside normal PU ranges; ask for a tolerance before tooling a large run.

A factory quote for OEM custom durometer screen printing squeegee should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. Custom durometer OEM is possible inside normal PU ranges; ask for a tolerance before tooling a large run.

Shops that reorder OEM custom durometer screen printing squeegee keep the approved hardness on the rack and do not mix it with a softer or harder blade. Custom durometer OEM is possible inside normal PU ranges; ask for a tolerance before tooling a large run.

If the current blade floods, streaks, or wears out in a few shifts, put OEM custom durometer screen printing squeegee on the replacement inquiry with the old measurements. Custom durometer OEM is possible inside normal PU ranges; ask for a tolerance before tooling a large run.

To request OEM custom durometer screen printing squeegee, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. Custom durometer OEM is possible inside normal PU ranges; ask for a tolerance before tooling a large run.

screen printing squeegee 70A wholesale

Purchasers comparing screen printing squeegee 70A wholesale should confirm Shore A, edge profile, thickness, and free length before they pay. 70A wholesale is a core textile stock item and is often the first bulk SKU a distributor loads.

A factory quote for screen printing squeegee 70A wholesale should list PU or rubber, handle or blade-only, MOQ, sample time, and bulk lead time. 70A wholesale is a core textile stock item and is often the first bulk SKU a distributor loads.

Shops that reorder screen printing squeegee 70A wholesale keep the approved hardness on the rack and do not mix it with a softer or harder blade. 70A wholesale is a core textile stock item and is often the first bulk SKU a distributor loads.

If the current blade floods, streaks, or wears out in a few shifts, put screen printing squeegee 70A wholesale on the replacement inquiry with the old measurements. 70A wholesale is a core textile stock item and is often the first bulk SKU a distributor loads.

To request screen printing squeegee 70A wholesale, email sales@macrokun.com or WhatsApp +86 13803219803 with quantity and the spec above. 70A wholesale is a core textile stock item and is often the first bulk SKU a distributor loads.

Quotation

Macrokun (Hebei Macrokun Mesh Co., Ltd.) manufactures screen printing squeegees, polyurethane blades, and related screen printing supplies for export. Website: macrokun.com. Email: sales@macrokun.com. WhatsApp: +86 13803219803.

Pre：Polyurethane Screen Printing Squeegee, Rubber Blade, and Handle Guide

Next：Screen Printing Squeegee Applications and Replacement Blades