Nylon Mesh 125 Micron - Open Area %: 39 - Width: 40 inch

Nylon Mesh 125 Micron - Open Area %: 39 - Width: 40 inch Resistant to common solvents and to alkalies but are attacked by strong mineral acids. Good abrasion resistance and low coefficient of friction. Working temperature is typically around 239F (115C).

Nylon Mesh 125 Micron - Open Area %: 39 - Width: 40 inch

  • Resistant to common solvents and to alkalies but are attacked by strong mineral acids.
  • Good abrasion resistance and low coefficient of friction.
  • Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).
  • Water absorption is very high.
  • Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed.

Nylon Mesh 125 Micron - Open Area %: 39 - Width: 40 inch

125 Micron Nylon Mesh Technical Information

Mesh Opening: 125 micron
Open Area: 39 %
Thread Diameter: 75 micron
Weight (lbs): 0.09 lbs/yd^2
Weight (oz): 1.5 oz/yd^2
Weight (g): 50 g/m^2
Thickness: 135 micron
Width: 40 inch
Length: All mesh are sold in Yards.
Nylon Mesh 125 Micron - Open Area %: 39 - Width: 40 inch
Material: Nylon
Specific Gravity: 1.14 g/mm^3
Tensile Strength: 41.67 daN/mm^2
Stability to light: Poor
Abrasion resistance: Good
Acid resistance: Limited-Poor
Alkaline resistance: Good
Stability to solvents: Limited
Hydrolysis resistance: Good
Nylon Mesh 125 Micron - Open Area %: 39 - Width: 40 inch

Request a Quote

Tags:

TOP