Nylon Mesh 74 Micron - Open Area %: 21 - Width: 40 inch
Nylon Mesh 74 Micron - Open Area %: 21 - Width: 40 inch Resistant to common solvents and to alkalies but are attacked by strong mineral acids. Good abrasion resistance and low coefficient of friction. Working temperature is typically around 239F (115C
Nylon Mesh 74 Micron - Open Area %: 21 - Width: 40 inch
- Resistant to common solvents and to alkalies but are attacked by strong mineral acids.
 - Good abrasion resistance and low coefficient of friction.
 - Working temperature is typically around 239F (115C). Exposure to sunlight can cause discoloration (yellowing).
 - Water absorption is very high.
 - Sterilizing by autoclaving, ETO sterilizing and gamma sterilizing (Under 2.5 Megarads) can be performed.
 
							
74 Micron Nylon Mesh Technical Information
							Mesh Opening: 74 micron
							Open Area: 21 %
							Thread Diameter: 89 micron
							Weight (lbs): 0.15 lbs/yd^2
							Weight (oz): 2.4 oz/yd^2
							Weight (g): 80 g/m^2
							Thickness: 155 micron
							Width: 40 inch
							Length: All mesh are sold in Yards.
							
							Material: Nylon
							Specific Gravity: 1.14 g/mm^3
							Tensile Strength: 41.67 daN/mm^2
							Stability to light: Poor
							Abrasion resistance: Good
							Acid resistance: Limited-Poor
							Alkaline resistance: Good
							Stability to solvents: Limited
							Hydrolysis resistance: Good

RELATED PRODUCTS
RELATED ARTICLES
Tags: