A frame is compatible when the actual mounting and operating requirements match, not simply because a listing says manual or automatic. Obtain the machine model and mounting specifications, then check the frame drawing and a representative sample. Never force a frame into unsuitable clamps or assume nominal dimensions guarantee clearance.

Illustration. Confirm actual product specifications, compatibility and availability before ordering.
Begin with machine identification
Screen printing frames for manual presses should be specified using the press model and clamp arrangement. Screen printing frames for automatic presses need the machine's permitted mounting range and frame profile. Automatic screen printing machine frames can vary between machines, so a generic category label is not sufficient. Manual screen printing machine frames also need verification; hand operation does not make every frame size compatible.
Record the equipment manufacturer, model and any modified mounting parts. A photograph helps explain the setup, but use dimensions or manufacturer documentation to settle a critical fit question. If the machine is shared across several products, identify the configuration that the new frames must support.
Check the complete operating envelope
For screen printing frames for manual presses, measure clamp contact and available clearance. Screen printing frames for automatic presses must meet the relevant loading and operating requirements. Drawings for automatic screen printing machine frames should identify outside size, profile and orientation. With manual screen printing machine frames, check the available print layout as well as the mounting point.
The usable opening and image position are separate from outside dimensions. Consider the squeegee and floodbar movement where applicable, the artwork position and access needed for screenmaking. Check exposure units, washout equipment and storage racks before standardizing a new size. These checks can prevent a technically mountable frame from becoming impractical elsewhere in the workflow.

Outer dimensions and inner opening of screen printing frames. Illustration; confirm actual specifications before ordering.
Need help choosing the right specification? Send your frame dimensions, mesh requirement, quantity and application. Ask Macrokun for a specification review and quote.
Trial a sample before buying a batch
Test screen printing frames for manual presses in the actual clamps without forcing the fit. Trial screen printing frames for automatic presses using the machine manufacturer's procedures. Samples of automatic screen printing machine frames should represent the proposed production profile. Confirm that manual screen printing machine frames allow the intended layout and normal handling.
Record the sample dimensions and the exact machine configuration tested. If a fit issue appears, stop and resolve it through the equipment and frame specifications. A change to profile, corner geometry or mounting hardware can require another review even when the overall size remains unchanged.
Make compatibility part of the quotation
A quotation for screen printing frames for manual presses should identify the approved drawing. For screen printing frames for automatic presses, include the relevant machine reference and confirmed requirements. Automatic screen printing machine frames should be separated into item lines if different profiles are needed. Manual screen printing machine frames should be quoted with the selected mesh or frame-only condition.
Ask the supplier to mark any proposed deviation from the inquiry. Confirm quantity, packing, sample arrangements and current lead time for the actual configuration. A claim of universal compatibility is less useful than a drawing and a documented fit check.

Custom aluminum frame dimensions and specification drawing. Illustration; confirm actual specifications before ordering.
Control changes on reorders
Reorder screen printing frames for manual presses by the approved configuration, not only by a familiar size name. For screen printing frames for automatic presses, report equipment changes before purchasing again. Automatic screen printing machine frames need a revision check when the supplier proposes a different profile. Manual screen printing machine frames require the same discipline if mounting parts have changed.
Keep sample approval, machine information and frame drawings together. Label frames so operators can identify which approved setup they belong to. If production expands to another machine, repeat the compatibility review rather than assuming the previous trial applies.
Request a specification review and quotation
For a Macrokun inquiry, email sales@macrokun.com with your drawing, frame quantity, mesh requirement, press model, destination and required delivery date. Ask the team to confirm product availability, technical feasibility, MOQ, sample arrangements and a written quotation. This guide does not promise stock, a particular service, a fixed price or a delivery date.
Ready to discuss your frame order?
Send your outer frame dimensions with units, profile, mesh count with units, quantity by specification, application, press model, delivery destination and required date. Attach a drawing or clear photos when available. If a specification is undecided, describe your print job and ask which options should be evaluated.
Request a Frame Quote by Email Discuss Your Requirements on WhatsApp
Email: sales@macrokun.com | WhatsApp: +86 13803219803 | Send an inquiry through our contact page
Ask for available options, sample arrangements, MOQ, pricing and estimated lead time for your specific order.
